[/ / Copyright (c) 2003 Boost.Test contributors / / Distributed under the Boost Software License, Version 1.0. (See accompanying / file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) /] [/ ##################################################################### ] [section:pem Program Execution Monitor] The components of a C++ program may report user-detected errors in several ways, such as via a return value or throwing an exception. System-detected errors such as dereferencing an invalid pointer are reported in other ways, totally operating system and compiler dependent. Yet many C++ programs, both production and test, must run in an environment where uniform reporting of errors is necessary. For example, converting otherwise uncaught exceptions to non-zero program return codes allows many command line, script, or batch environments to continue processing in a controlled manner. Even some ['GUI] environments benefit from the unification of errors into program return codes. The Boost.Test Library's *Program Execution Monitor* relieves users from messy error detection and reporting duties by providing a replacement function `main()` which calls a user-supplied `cpp_main()` function within a monitored environment. The supplied `main()` then uniformly detects and reports the occurrence of several types of errors, reducing them to a uniform return code which is returned to the host environment. Uniform error reporting is particularly useful for programs running unattended under control of scripts or batch files. Some operating systems pop up message boxes if an uncaught exception occurs, and this requires manual intervention. By converting such exceptions into non-zero program return codes, the library makes the program a better citizen. More uniform reporting of errors isn't a benefit to some programs, particularly programs always run by hand of a knowledgeable person. So the __PEM__ wouldn't be worth using in that environment. Uniform error reporting can be also useful in test environments such as the Boost regression tests. Be aware though in such case it might be preferable to use the __UTF__, because it allows one to use the [link boost_test.testing_tools testing tools] and generate more detailed error information. [section Usage] To facilitate uniform error reporting the __PEM__ supplies function `main()` as part if it's implementation. To use the __PEM__ instead of regular function `main` your program is required to supply a function `cpp_main()` with same signature. Here is the traditional ['Hello World] program implemented using the __PEM__: [bt_example example24..Hello World with the Program Execution Monitor..run-fail] It really is that simple - just change the name of your initial function from `main()` to `cpp_main()`. Do make sure the `argc` and `argv` parameters are specified (although you don't have to name them if you don't use them). The __PEM__ treats as errors: * Exceptions thrown from `cpp_main()` * Non-zero return from `cpp_main()` So what if some function had thrown a `std::runtime_error` with the message "big trouble" and it is not trapped by any catch clause? Like in a following example: [bt_example example25..Standard exception detection within the __PEM__..run-fail] [note Note that in both examples above we used [link boost_test.components.section_pem.section_pem_compilation.section_pem_full_include header-only variant] of the __PEM__. Alternatively the binaries may be built and linked with a [link boost_test.components.section_pem.section_pem_compilation.section_pem_standalone standalone library] (in case of static library we are not required to include any __PEM__ related headers). ] Let's consider an example where function `cpp_main()` had bubbled up a return code of 5: [bt_example example26..Error return code detection of the __PEM__..run-fail] The __PEM__ reports errors to both `std::cout` (details) and `std::cerr` (summary). Primary detailed error messages appear on standard output stream so that it is properly interlaced with other output, thus aiding error analysis. While the final error notification message appears on standard error stream. This increases the visibility of error notification if standard output and error streams are directed to different devices or files. The __PEM__'s supplied `main()` will return following result codes: * `boost::exit_success` - no errors * `boost::exit_failure` - non-zero and `non-boost::exit_success` return code from `cpp_main()` * `boost::exit_exception_failure` - `cpp_main()` throw an exception [endsect] [/ Usage] [/ #################################################################################### configuration] [section Runtime configuration] There are two aspects of the __PEM__ behavior that you can customize at runtime. Customization is performed using environment variables. [table:id_pem_env The __PEM__ configuration environment variables [ [Flag] [Usage] ] [ [`BOOST_TEST_CATCH_SYSTEM_ERRORS`] [allows customizing behavior of the __PEM__ in regards of catching system errors. For more details about the meaning of this option see the [classref boost::execution_monitor execution_monitor] class. If you want to prevent the __PEM__ from catching system exception, set the value of this variable to "no". The default value is "yes".] ] [ [`BOOST_PRG_MON_CONFIRM`] [allows avoiding success confirmation message. Some users prefer to see a confirmation message in case if program successfully executed. While others don't like the clutter or any output is prohibited by organization standards. To avoid the message set the value of this variable to "no". The default value is "yes".] ] ] [note `BOOST_TEST_CATCH_SYSTEM_ERRORS` is similar to the __UTF__'s [link boost_test.utf_reference.rt_param_reference.catch_system `catch_system_error`] command line parameter.] [endsect] [/ configuration] [/ #################################################################################### implementation] [#ref_pem_implementation][section Implementation] To monitor execution of user supplied function `cpp_main()` the __PEM__ relies on the Boost.Test's [link boost_test.components.execution_monitor Execution Monitor]. Also the __PEM__ supplies the function `main()` to facilitate uniform error reporting. Following files constitute the __PEM__ implementation: [table:pem_implementation_file __PEM__ implementation files [ [File name] [Content] ] [ [`boost/test/impl/execution_monitor.ipp`] [provides __EM__ implementation for all supported configurations] ] [ [`boost/test/impl/cpp_main.ipp`] [supplies function `main()` for static library build] ] [ [`boost/test/included/prg_exec_monitor.hpp`] [combines all implementation files into single header to be use as inlined version of component] ] [ [`boost/test/prg_exec_monitor.hpp`] [contains definitions for `main()` function for dynamic library build and pragmas for auto-linking feature support] ] ] The __PEM__ implementation wraps several system headers and is intended to be used as standalone library. While there exist an alternative variant to [link ref_pem_direct_include include the whole implementation directly] into your program, for the long term usage the preferable solution is to [link ref_pem_stanlone build library once] and reuse it. [endsect] [/implementation] [section:section_pem_compilation Compilation] In comparison with many other boost libraries, which are completely implemented in header files, compilation and linking with the __PEM__ may require additional steps. The __PEM__ presents you with options to either # built and link with a [link ref_pem_stanlone standalone library] or # include the implementation [link ref_pem_direct_include directly] into your program. If you opt to use the library the __PEM__ header implements the [*auto-linking support] and following flags can be used to configure compilation of the __PEM__ library and your program: [table [ [Variable] [Usage] ] [ [__BOOST_TEST_DYN_LINK__] [Define this flag to build/use dynamic library] ] [ [__BOOST_TEST_NO_LIB__] [Define this flag to prevent auto-linking] ] ] [#ref_pem_stanlone][section:section_pem_standalone Standalone library compilation] If you opted to link your program with the standalone library, you need to build it first. To build a standalone library all C++ files (.cpp), that constitute __PEM__ [link ref_pem_implementation implementation] need to be listed as source files in your makefile [footnote There are varieties of make systems that can be used. To name a few: ['GNU] make (and other make clones) and build systems integrated into ['IDE]s (for example ['Microsoft Visual Studio]). The Boost preferred solution is Boost.Build system that is based on top of `b2` tool. Make systems require some kind of configuration file that lists all files that constitute the library and all build options. For example the makefile that is used by make, or the Microsoft Visual Studio project file, Jamfile is used by Boost.Build. For the sake of simplicity let's call this file the makefile.]. The makefile for use with Boost.Build system is supplied in `` libs/test/build `` directory. The __PEM__ can be built as either [link ref_pem_static static] or [link ref_pem_dynamic dynamic] library. [#ref_pem_static][section:section_pem_compilation_static Static library compilation] There are no additional build defines or options required to build static library. Using Boost.Build system you can build the static library with a following command from `libs/test/build` directory: `` b2 -sTOOLS= -sBUILD=boost_prg_exec_monitor `` Also on Windows you can use the Microsoft Visual Studio .NET project file provided. [endsect] [/ static compilation] [#ref_pem_dynamic][section:section_pem_compilation_dynamic Dynamic library compilation] To build the dynamic library [footnote What is meant by the term dynamic library is a ['dynamically loaded library], alternatively called a ['shared library].] you need to add __BOOST_TEST_DYN_LINK__ to the list of macro definitions in the ``libs/test/build`` directory: `` b2 -sTOOLS= -sBUILD=boost_prg_exec_monitor `` Also on Windows you can use the Microsoft Visual Studio .NET project file provided. [caution For your program to successfully link with the dynamic library the flag __BOOST_TEST_DYN_LINK__ needs to be defined both during dynamic library build and during your program compilation. ] [endsect] [/ dynamic compilation] [endsect] [/ standalone lib compilation] [#ref_pem_auto_link][section Support of the auto-linking feature] For the Microsoft family of compilers the __PEM__ provides an ability to automatically select proper library name and add it to the list of objects to be linked with. To employ this feature you required to include either header `` #include `` or header `` #include `` By default the feature is enabled. To disable it you have to define the flag __BOOST_TEST_NO_LIB__. [endsect] [/ autolink] [#ref_pem_direct_include][section:section_pem_full_include Including the __PEM__ directly into your program] If you prefer to avoid the standalone library compilation you have two alternative usage variants: you can either include all files that constitute the static library in your program's makefile or include them as a part of your program's source file. To facilitate the later variant the __PEM__ implementation presents the header `` #include `` In both variants neither __BOOST_TEST_DYN_LINK__ nor __BOOST_TEST_NO_LIB__ are applicable. This solution may not be the best choice in a long run, since it requires the __PEM__ sources recompilation for every program you use it with. [endsect] [/ direct include] [endsect] [/compilation] [endsect] [/program execution monitor]