![]() |
Home | Libraries | People | FAQ | More |
#include <boost/math/interpolators/catmull_rom.hpp> namespace boost{ namespace math{ template<class Point, class RandomAccessContainer = std::vector<Point> > class catmull_rom { public: catmull_rom(RandomAccessContainer&& points, bool closed = false, Real alpha = (Real) 1/ (Real) 2) catmull_rom(std::initializer_list<Point> l, bool closed = false, typename Point::value_type alpha = (typename Point::value_type) 1/ (typename Point::value_type) 2); Real operator()(Real s) const; Real max_parameter() const; Real parameter_at_point(size_t i) const; Point prime(Real s) const; }; }}
Catmull-Rom splines are a family of interpolating curves which are commonly used in computer graphics and animation. Catmull-Rom splines enjoy the following properties:
The catmull_rom
class provided
by Boost.Math creates a cubic Catmull-Rom spline from an array of points in
any dimension. Since there are numerous ways to represent a point in n-dimensional
space, the class attempts to be flexible by templating on the point type. The
requirements on the point type are discussing in more detail below, but roughly,
it must have a dereference operator defined (e.g., p[0]
is not a syntax error), it must be able to be dereferenced up to dimension -1
, and p[i]
is of type Real
, define value_type
, and the free function size()
. These
requirements are met by std::vector
and std::array
. The basic usage is shown here:
std::vector<std::array<Real, 3>> points(4); points[0] = {0,0,0}; points[1] = {1,0,0}; points[2] = {0,1,0}; points[3] = {0,0,1}; catmull_rom<std::array<Real, 3>> cr(std::move(points)); // Interpolate at s = 0.1: auto point = cr(0.1);
The spline can be either open or closed, closed meaning that there is some s > 0 such that P(s) = P(0). The default is open, but this can be easily changed:
// closed = true catmull_rom<std::array<Real, 3>> cr(std::move(points), true);
In either case, evaluating the interpolator at s=0 returns the first point in the list.
If the curve is open, then the first and last segments may have strange behavior. The traditional solution is to prepend a carefully selected control point to the data so that the first data segment (second interpolator segment) has reasonable tangent vectors, and simply ignore the first interpolator segment. A control point is appended to the data using similar criteria. However, we recommend not going through this effort until it proves to be necessary: For most use-cases, the curve is good enough without prepending and appending control points, and responsible selection of non-data control points is difficult.
Inside catmull_rom
, the curve
is represented as closed. This is because an open Catmull-Rom curve is implicitly
closed, but the closing point is the zero vector. There is no reason
to suppose that the zero vector is a better closing point than the endpoint
(or any other point, for that matter), so traditionally Catmull-Rom splines
leave the segment between the first and second point undefined, as well as
the segment between the second-to-last and last point. We find this property
of the traditional implementation of Catmull-Rom splines annoying and confusing
to the user. Hence internally, we close the curve so that the first and last
segments are defined. Of course, this causes the tangent
vectors to the first and last points to be bizarre. This is a "pick your
poison" design decision-either the curve cannot interpolate in its first
and last segments, or the tangents along the first and last segments are meaningless.
In the vast majority of cases, this will be no problem to the user. However,
if it becomes a problem, then the user should add one extra point in a position
they believe is reasonable and close the curve.
Since the routine internally represents the curve as closed, a question arises: Why does the user have to specify if the curve is open or closed? The answer is that the parameterization is chosen by the routine, so it is of interest to the user to understand the values where a meaningful result is returned.
Real max_s = cr.max_parameter();
If you attempt to interpolate for s
> max_s
,
an exception is thrown. If the curve is closed, then cr(max_s)
= p0
,
where p0
is the first point
on the curve. If the curve is open, then cr(max_s)
= pf
,
where pf
is the final point
on the curve.
The Catmull-Rom curve admits an infinite number of parameterizations. The default
parameterization of the catmull_rom
class is the so-called centripedal parameterization. This
parameterization has been shown to be the only parameterization that does not
form cusps or self-intersections within segments. However, for advanced users,
other parameterizations can be chosen using the alpha
parameter:
// alpha = 1 is the "chordal" parameterization. catmull_rom<std::array<double, 3>> cr(std::move(points), false, 1.0);
The alpha parameter must always be in the range [0,1]
.
Finally, the tangent vector to any point of the curve can be computed via
double s = 0.1; Point tangent = cr.prime(s);
Since the magnitude of the tangent vector is dependent on the parameterization, it is not meaningful (unless the user chooses the chordal parameterization alpha = 1 which parameterizes by Euclidean distance between points.) However, its direction is meaningful no matter the parameterization, so the user may wish to normalize this result.
The following performance numbers were generated for a call to the Catmull-Rom interpolation method. The number that follows the slash is the number of points passed to the interpolant. We see that evaluation of the interpolant is 𝑶(log(N)).
Run on 2700 MHz CPU CPU Caches: L1 Data 32K (x2) L1 Instruction 32K (x2) L2 Unified 262K (x2) L3 Unified 3145K (x1) --------------------------------------------------------- Benchmark Time CPU --------------------------------------------------------- BM_CatmullRom<double>/4 20 ns 20 ns BM_CatmullRom<double>/8 21 ns 21 ns BM_CatmullRom<double>/16 23 ns 23 ns BM_CatmullRom<double>/32 24 ns 24 ns BM_CatmullRom<double>/64 27 ns 27 ns BM_CatmullRom<double>/128 27 ns 27 ns BM_CatmullRom<double>/256 30 ns 30 ns BM_CatmullRom<double>/512 32 ns 31 ns BM_CatmullRom<double>/1024 33 ns 33 ns BM_CatmullRom<double>/2048 34 ns 34 ns BM_CatmullRom<double>/4096 36 ns 36 ns BM_CatmullRom<double>/8192 38 ns 38 ns BM_CatmullRom<double>/16384 39 ns 39 ns BM_CatmullRom<double>/32768 40 ns 40 ns BM_CatmullRom<double>/65536 45 ns 44 ns BM_CatmullRom<double>/131072 46 ns 46 ns BM_CatmullRom<double>/262144 50 ns 50 ns BM_CatmullRom<double>/524288 53 ns 52 ns BM_CatmullRom<double>/1048576 58 ns 57 ns BM_CatmullRom<double>_BigO 2.97 lgN 2.97 lgN BM_CatmullRom<double>_RMS 19 % 19 %
We have already discussed that certain conditions on the Point
type template argument must be obeyed. The following shows a custom point type
in 3D which can be used as a template argument to Catmull-Rom:
template<class Real> class mypoint3d { public: // Must define a value_type: typedef Real value_type; // Regular constructor--need not be of this form. mypoint3d(Real x, Real y, Real z) {m_vec[0] = x; m_vec[1] = y; m_vec[2] = z; } // Must define a default constructor: mypoint3d() {} // Must define array access: Real operator[](size_t i) const { return m_vec[i]; } // Must define array element assignment: Real& operator[](size_t i) { return m_vec[i]; } private: std::array<Real, 3> m_vec; }; // Must define the free function "size()": template<class Real> constexpr size_t size(const mypoint3d<Real>& c) { return 3; }
These conditions are satisfied by both std::array
and
std::vector
, but it may nonetheless be useful
to define your own point class so that (say) you can define geometric distance
between them.
The Catmull-Rom interpolator requires memory for three more points than is
provided by the user. This causes the class to call a resize()
on the input vector. If v.capacity() >= v.size()
+ 3
,
then no problems arise; there are no reallocs, and in practice this condition
is almost always satisfied. However, if v.capacity() < v.size()
+ 3
,
the realloc
causes a performance
penalty of roughly 20%.
The Point
type may be stored
in a different container than std::vector
.
For example, here is how to store the points in a Boost.uBLAS vector:
mypoint3d<Real> p0(0.1, 0.2, 0.3); mypoint3d<Real> p1(0.2, 0.3, 0.4); mypoint3d<Real> p2(0.3, 0.4, 0.5); mypoint3d<Real> p3(0.4, 0.5, 0.6); mypoint3d<Real> p4(0.5, 0.6, 0.7); mypoint3d<Real> p5(0.6, 0.7, 0.8); boost::numeric::ublas::vector<mypoint3d<Real>> u(6); u[0] = p0; u[1] = p1; u[2] = p2; u[3] = p3; u[4] = p4; u[5] = p5; // Tests initializer_list: catmull_rom<mypoint3d<Real>, decltype(u)> cat(std::move(u));