[/ / Copyright (c) 2003 Boost.Test contributors / / Distributed under the Boost Software License, Version 1.0. (See accompanying / file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) /] [section:testing_tool_ref Reference API for writing tests] [/ ###############################################################################################] [section:assertion_boost_test_universal_macro `BOOST_TEST`] `` BOOST_TEST(statement); BOOST_TEST_(statement); // replacement failure message, requires variadic macros BOOST_TEST(statement, "failure message"); // Floating point comparison, requires variadic macros, auto and decltype BOOST_TEST(statement, floating_point_comparison_manipulation); // bitwise comparison, requires variadic macros, auto and decltype BOOST_TEST(statement, boost::test_tools::bitwise() ); // element-wise comparison, for containers BOOST_TEST(statement, boost::test_tools::per_element() ); // lexicographic comparison, for containers BOOST_TEST(statement, boost::test_tools::lexicographic() ); `` The full documentation of this macro is located [link boost_test.testing_tools.boost_test_universal_macro here]. The macro is available in three variants, corresponding to different [link boost_test.testing_tools.tools_assertion_severity_level assertion severity levels]: `` BOOST_TEST // or BOOST_TEST_CHECK BOOST_TEST_REQUIRE BOOST_TEST_WARN `` * `"failure message"` is a C-string printed in case of failure in place of the default message. See [link boost_test.testing_tools.reports this section] for more details. * `floating_point_comparison_manipulation` is one of the floating point comparison manipulators. See [link boost_test.testing_tools.boost_test_universal_macro this section] for more details. * [classref boost::test_tools::bitwise] is a manipulator indicating that the comparison should be performed bitwise. See [link boost_test.testing_tools.extended_comparison.bitwise this section] for more details * [classref boost::test_tools::per_element] is a manipulator indicating that the comparison should be performed on each element, in sequence, rather than on containers. See [link boost_test_coll_perelement this section] for more details * [classref boost::test_tools::lexicographic] is a manipulator indicating that the comparison should be performed with the lexicographic order. See [link boost_test_coll_default_lex this section] for more details [h3 Limitations and workaround] There are some restrictions on the statements that are supported by this tool. Those are explained in details in [link boost_test_statement_limitations this] section. [endsect] [/ DECORATORS ###############################################################################################] [/-----------------------------------------------------------------] [section:decorator_expected_failures expected_failures (decorator)] `` expected_failures(counter_t number); `` Indicates the expected failures for a test unit. See [link boost_test.testing_tools.expected_failures here] for more details. [endsect] [/ section expected_failures] [/-----------------------------------------------------------------] [section:decorator_timeout timeout (decorator)] `` timeout(unsigned int seconds); `` Specifies a time-out for a *test-case* or a *test-suite*, in wall-clock time. If a test-case lasts longer than the timeout, the test is flagged as failed. On some systems (see below), the test-case is forced to stop. For test-suites, the mechanism is similar: every test-unit under the test-suite is allocated a maximum duration time that is the remainder of the timeout after the previous tests have been executed. If a timeout occurs during the execution of the suite, the suite is flagged as timed-out and the remaining test-units are skipped. See [link boost_test.testing_tools.timeout here] for more details. [note The macro `BOOST_SIGACTION_BASED_SIGNAL_HANDLING` is defined if Boost.Test is able to force the test-case to stop.] [note The support for test suites has been added in [link ref_CHANGE_LOG_3_10 Boost 1.70 / __UTF__ v3.10]] [endsect] [/ section timeout] [/-----------------------------------------------------------------] [section:decorator_tolerance tolerance (decorator)] `` template tolerance(FPT eps); template tolerance(test_tools::fpc::percent_tolerance_t eps) `` Decorator `tolerance` specifies the default comparison tolerance for floating point type `FTP` in the decorated test unit. The default tolerance only applies to a particular type, so it makes sense to provide more than one `tolerance` decorator if we are comparing different floating point types. The variant with `percent_tolerance` uses value ``eps / 100`` as tolerance. [note For more details see the [link boost_test.testing_tools.extended_comparison.floating_point floating points comparison] section. ] [bt_example decorator_13..decorator tolerance..run-fail] In the above example, in `test1`, checks on `double`s fail because they differ by more what tolerance for `double`s specifies. In `test2` the tolerance for `double`s is greater and therefore the checks succeed. In `test3`, we specify only tolerance for type `float`, and since the checks use type `double` the specified tolerance does not apply. Tolerance in `test4` is equivalent to that in `test1`, therefore its checks also fail. Tolerance in `test5` is equivalent to that in `test2`, therefore its checks also succeed. [endsect] [/ section decorator_tolerance] [/ DEPRECATED API] [/ ###############################################################################################] [#ref_BOOST_level][section:assertion_boost_level `BOOST_`] `` BOOST_WARN(predicate); BOOST_CHECK(predicate); BOOST_REQUIRE(predicate); `` These tools are used to validate the predicate value. The only parameter for these tools is a boolean predicate value that gets validated. It could be any expression that could be evaluated and converted to boolean value. The expression gets evaluated only once, so it's safe to pass complex expression for validation. [bt_example example34..BOOST_ usage..run-fail] See also: * __BOOST_LEVEL_MESSAGE__ [endsect] [/ ###############################################################################################] [section:assertion_boost_level_bitwise_eq `BOOST__BITWISE_EQUAL`] `` BOOST_WARN_BITWISE_EQUAL(left, right); BOOST_CHECK_BITWISE_EQUAL(left, right); BOOST_REQUIRE_BITWISE_EQUAL(left, right); `` These tools are used to perform bitwise comparison of two values. The check shows all positions where left and right value's bits mismatch. The first parameter is the left compared value. The second parameter is the right compared value. Parameters are not required to be of the same type, but warning is issued if their type's size does not coincide. [bt_example example33..BOOST__BITWISE_EQUAL usage..run-fail] See also: * __BOOST_LEVEL_EQUAL__ [endsect] [/ ###############################################################################################] [section:assertion_boost_level_eq `BOOST__EQUAL`] `` BOOST_WARN_EQUAL(left, right); BOOST_CHECK_EQUAL(left, right); BOOST_REQUIRE_EQUAL(left, right); `` Check performed by these tools is the same as the one performed by `__BOOST_LEVEL__(left == right)`. The difference is that the mismatched values are reported as well. [note It is bad idea to use these tools to compare floating point values. Use __BOOST_LEVEL_CLOSE__ or __BOOST_LEVEL_CLOSE_FRACTION__ tools instead. ] [bt_example example35..BOOST__EQUAL usage..run-fail] See also: * __BOOST_LEVEL__ * __BOOST_LEVEL_CLOSE__ * __BOOST_LEVEL_NE__ * __BOOST_LEVEL_EQUAL_COLLECTIONS__ [endsect] [/ ###############################################################################################] [section:assertion_boost_level_eq_collections `BOOST__EQUAL_COLLECTIONS`] `` BOOST_WARN_EQUAL_COLLECTIONS(left_begin, left_end, right_begin, right_end); BOOST_CHECK_EQUAL_COLLECTIONS(left_begin, left_end, right_begin, right_end); BOOST_REQUIRE_EQUAL_COLLECTIONS(left_begin, left_end, right_begin, right_end); `` These tools are used to perform an element by element comparison of two collections. They print all mismatched positions, collection elements at these positions and check that the collections have the same size. The first two parameters designate begin and end of the first collection. The two last parameters designate begin and end of the second collection. [bt_example example36..BOOST__EQUAL_COLLECTIONS usage..run-fail] See also: * __BOOST_LEVEL_EQUAL__ [endsect] [/ ###############################################################################################] [section:assertion_boost_level_close `BOOST__CLOSE`] `` BOOST_WARN_CLOSE(left, right, tolerance); BOOST_CHECK_CLOSE(left, right, tolerance); BOOST_REQUIRE_CLOSE(left, right, tolerance); `` These tools are used to check on closeness using strong relationship defined by the predicate ``check_is_close( left, right, tolerance )`` To check for the weak relationship use __BOOST_LEVEL_PREDICATE__ family of tools with explicit `check_is_close` invocation. The first parameter is the ['left] compared value. The second parameter is the ['right] compared value. Last third parameter defines the tolerance for the comparison in [link boost_test.testing_tools.extended_comparison.floating_point [*percentage units]]. [note It is required for left and right parameters to be of the same floating point type. You will need to explicitly resolve any type mismatch to select which type to use for comparison. ] [note The floating point comparison tools are automatically added if the __UTF__ is included as indicated in the previous sections. The tools are implemented is in the header [headerref boost/test/tools/floating_point_comparison.hpp `boost/test/tools/floating_point_comparison.hpp`].] [bt_example example42..BOOST__CLOSE usage with small values..run-fail] [bt_example example43..BOOST__CLOSE usage with big values..run] See also: * __BOOST_LEVEL_CLOSE_FRACTION__ * __BOOST_LEVEL_SMALL__ * __BOOST_LEVEL_EQUAL__ * __floating_points_testing_tools__ [endsect] [/ ###############################################################################################] [section:assertion_boost_level_close_fraction `BOOST__CLOSE_FRACTION`] `` BOOST_WARN_CLOSE_FRACTION(left, right, tolerance); BOOST_CHECK_CLOSE_FRACTION(left, right, tolerance); BOOST_REQUIRE_CLOSE_FRACTION(left, right, tolerance); `` These tools are used to check on closeness using strong relationship defined by the predicate ``check_is_close(left, right, tolerance)`` To check for the weak relationship use __BOOST_LEVEL_PREDICATE__ family of tools with explicit `check_is_close` invocation. The first parameter is the ['left] compared value. The second parameter is the ['right] compared value. Last third parameter defines the tolerance for the comparison as [link boost_test.testing_tools.extended_comparison.floating_point [*fraction of absolute values being compared]]. [note It is required for left and right parameters to be of the same floating point type. You will need to explicitly resolve any type mismatch to select which type to use for comparison.] [note The floating point comparison tools are automatically added if the __UTF__ is included as indicated in the previous sections. The tools are implemented is in the header [headerref boost/test/tools/floating_point_comparison.hpp `boost/test/tools/floating_point_comparison.hpp`].] [bt_example example44..BOOST__CLOSE_FRACTION usage..run-fail] See also: * __BOOST_LEVEL_CLOSE__ * __BOOST_LEVEL_SMALL__ * __BOOST_LEVEL_EQUAL__ * __floating_points_testing_tools__ [endsect] [/ ###############################################################################################] [section:assertion_boost_level_ge `BOOST__GE`] `` BOOST_WARN_GE(left, right); BOOST_CHECK_GE(left, right); BOOST_REQUIRE_GE(left, right); `` Check performed by these tools is the same as the one performed by `__BOOST_LEVEL__( left >= right )`. The difference is that the argument values are reported as well. [bt_example example57..BOOST__GE usage..run-fail] See also: * __BOOST_LEVEL_LE__ * __BOOST_LEVEL_LT__ * __BOOST_LEVEL_GT__ [endsect] [/ ###############################################################################################] [section:assertion_boost_level_gt `BOOST__GT`] `` BOOST_WARN_GT(left, right); BOOST_CHECK_GT(left, right); BOOST_REQUIRE_GT(left, right); `` Check performed by these tools is the same as the one performed by __BOOST_LEVEL__`( left > right )`. The difference is that the argument values are reported as well. [bt_example example58..BOOST__GT usage..run-fail] See also: * __BOOST_LEVEL_LE__ * __BOOST_LEVEL_LT__ * __BOOST_LEVEL_GE__ [endsect] [/ ###############################################################################################] [section:assertion_boost_level_le `BOOST__LE`] `` BOOST_WARN_LE(left, right); BOOST_CHECK_LE(left, right); BOOST_REQUIRE_LE(left, right); `` Check performed by these tools is the same as the one performed by `__BOOST_LEVEL__( left <= right )`. The difference is that the argument values are reported as well. [bt_example example55..BOOST__LE usage..run-fail] See also: * __BOOST_LEVEL_LE__ * __BOOST_LEVEL_GE__ * __BOOST_LEVEL_GT__ [endsect] [/ ###############################################################################################] [section:assertion_boost_level_lt `BOOST__LT`] `` BOOST_WARN_LT(left, right); BOOST_CHECK_LT(left, right); BOOST_REQUIRE_LT(left, right); `` Check performed by these tools is the same as the one performed by `__BOOST_LEVEL__( left < right )`. The difference is that the argument values are reported as well. [bt_example example56..BOOST__LT usage..run-fail] See also: * __BOOST_LEVEL_LE__ * __BOOST_LEVEL_GE__ * __BOOST_LEVEL_GT__ [endsect] [/ ###############################################################################################] [section:assertion_boost_level_message `BOOST__MESSAGE`] `` BOOST_WARN_MESSAGE(predicate, message); BOOST_CHECK_MESSAGE(predicate, message); BOOST_REQUIRE_MESSAGE(predicate, message); `` These tools perform exactly the same check as __BOOST_LEVEL__ tools. The only difference is that instead of generating an error/confirm message these use the supplied one. The first parameter is the boolean expression. The second parameter is the message reported in case of check failure. The message argument can be constructed of components of any type supporting the `std::ostream& operator<<(std::ostream&)`. [bt_example example38..BOOST__MESSAGE usage..run] See also: * __BOOST_LEVEL__ [endsect] [/ ###############################################################################################] [section:assertion_boost_level_ne `BOOST__NE`] `` BOOST_WARN_NE(left, right); BOOST_CHECK_NE(left, right); BOOST_REQUIRE_NE(left, right); `` Check performed by these tools is the same as the one performed by `__BOOST_LEVEL__( left != right )`. The difference is that the matched values are reported as well. [bt_example example54..BOOST__NE usage..run-fail] See also: * __BOOST_LEVEL_EQUAL__ [endsect] [/ ###############################################################################################] [section:assertion_boost_level_predicate `BOOST__PREDICATE`] `` BOOST_WARN_PREDICATE(predicate, arguments_list); BOOST_CHECK_PREDICATE(predicate, arguments_list); BOOST_REQUIRE_PREDICATE(predicate, arguments_list); `` These are generic tools used to validate an arbitrary supplied predicate functor (there is a compile time limit on predicate arity defined by the configurable macro `BOOST_TEST_MAX_PREDICATE_ARITY`). To validate zero arity predicate use __BOOST_LEVEL__ tools. In other cases prefer theses tools. The advantage of these tools is that they show arguments values in case of predicate failure. The first parameter is the predicate itself. The second parameter is the list of predicate arguments each wrapped in round brackets (`BOOST_PP` sequence format). [bt_example example40..BOOST__PREDICATE usage..run] [note Note difference in error log from __BOOST_LEVEL__] See also: * __BOOST_LEVEL__ [endsect] [/ ###############################################################################################] [section:assertion_boost_level_no_throw `BOOST__NO_THROW`] `` BOOST_WARN_NO_THROW(expression); BOOST_CHECK_NO_THROW(expression); BOOST_REQUIRE_NO_THROW(expression); `` These assertions validate that the execution of `expression` does not throw any exception. To that extent, all possible exception are caught by assertion itself and no exception is propagated to the test body. [tip It is possible to test for complex expressions with the use of constructs such as `do { /* ... */} while(0)` block. ] [bt_example exception_nothrow..BOOST__NO_THROW usage..run-fail] See also: * __BOOST_LEVEL_THROW__ * [link boost_test.testing_tools.exception_correctness Exception correctness] section [endsect] [/ ###############################################################################################] [section:assertion_boost_level_throw `BOOST__THROW`] `` BOOST_WARN_THROW(expression, exception_type); BOOST_CHECK_THROW(expression, exception_type); BOOST_REQUIRE_THROW(expression, exception_type); `` These assertions validate that the execution of `expression` raises an /expected/ exception, which means an exception of the supplied `exception_type` type or of any child type. * If `expression` raises an unexpected exception, this exception is not caught by `BOOST__THROW` assertion and might propagate to the test body. If not caught at all, the framework will catch it and terminate the test case with the status /failed/. * If `expression` does not raise any exception, the the assertion fails. [warning the assertion catches only the expected exceptions.] [tip It is possible to test for complex expressions with the use of constructs such as `do { /* ... */} while(0)` block. ] [bt_example exception_check..BOOST__THROW usage..run-fail] See also: * __BOOST_LEVEL_NO_THROW__ * [link boost_test.testing_tools.exception_correctness Exception correctness] section [endsect] [/ ###############################################################################################] [section:assertion_boost_level_exception `BOOST__EXCEPTION`] `` BOOST_WARN_EXCEPTION(expression, exception_type, predicate); BOOST_CHECK_EXCEPTION(expression, exception_type, predicate); BOOST_REQUIRE_EXCEPTION(expression, exception_type, predicate); `` As for __BOOST_LEVEL_THROW__, these assertions validate that `expression` raises an exception of the type specified by `exception_type` or any of its child type, with additional checks on the exception instance. * If an expected exception is raised by `expression`, the instance of the exception is passed to `predicate` for further validation. * It behaves like __BOOST_LEVEL_THROW__ if `expression` does not raise any exception, or an unrelated exception is raised. `predicate` should be a unary function accepting an instance of `exception_type` or any of its child, and that should return a boolean indicating a success (`true`) or a failure (`false`). [warning the assertion catches only the expected exceptions.] [tip It is possible to test for complex expressions with the use of constructs such as `do { /* ... */} while(0)` block. ] The example below checks that the exception carries the proper error code. [bt_example exception_check_predicate..BOOST__EXCEPTION usage..run-fail] See also: * __BOOST_LEVEL_THROW__ * [link boost_test.testing_tools.exception_correctness Exception correctness] section [endsect] [/ ###############################################################################################] [section:assertion_boost_level_small `BOOST__SMALL`] `` BOOST_WARN_SMALL(value, tolerance); BOOST_CHECK_SMALL(value, tolerance); BOOST_REQUIRE_SMALL(value, tolerance); `` These tools are used to check that supplied value is small enough. The "smallness" is defined by absolute value of the tolerance supplied as a second argument. Use these tools with caution. To compare to values on closeness it's preferable to use __BOOST_LEVEL_CLOSE__ tools instead. The first parameter is the value to check. The second parameter is the tolerance. [note The floating point comparison tools are automatically added if the __UTF__ is included as indicated in the previous sections. The tools are implemented is in the header [headerref boost/test/tools/floating_point_comparison.hpp `boost/test/tools/floating_point_comparison.hpp`].] [bt_example example41..BOOST__SMALL usage..run-fail] See also: * __BOOST_LEVEL_CLOSE__ * __BOOST_LEVEL_CLOSE_FRACTION__ * __floating_points_testing_tools__ [endsect] [/ ###############################################################################################] [section:test_org_boost_test_case_expected_failure `BOOST_AUTO_TEST_CASE_EXPECTED_FAILURES`] Indicates the number of failures for a test case. See [link boost_test.testing_tools.expected_failures here] for more details. [endsect] [/ expected failures] [/ ###############################################################################################] [section:assertion_boost_error `BOOST_ERROR`] `` BOOST_ERROR(message); `` __BOOST_ERROR__ tool behave the same way as `__BOOST_TEST__(false, message)`. This tool is used for an unconditional error counter increasing and message logging. The tool's only parameter is an error message to log. [bt_example example46..BOOST_ERROR usage..run-fail] See also: * __BOOST_TEST__ [endsect] [/ ###############################################################################################] [section:assertion_boost_fail `BOOST_FAIL`] `` BOOST_FAIL(message); `` `__BOOST_FAIL__(message)` behave the same way as `__BOOST_TEST_REQUIRE__(false, message)`. This tool is used for an unconditional error counter increasing, message logging and the current test case aborting. The tool's only parameter is an error message to log. [bt_example example47..BOOST_FAIL usage..run-fail] See also: * __BOOST_TEST__ * [endsect] [/ ###############################################################################################] [section:assertion_boost_is_defined `BOOST_IS_DEFINED`] `` BOOST_IS_DEFINED(symbol); `` Unlike the rest of the tools in the toolbox this tool does not perform the logging itself. Its only purpose is to check at runtime whether or not the supplied preprocessor symbol is defined. Use it in combination with __BOOST_LEVEL__ to perform and log validation. Macros of any arity could be checked. To check the macro definition with non-zero arity specify dummy arguments for it. See below for example. The only tool's parameter is a preprocessor symbol that gets validated. [bt_example example48..BOOST_IS_DEFINED usage..run-fail] See also: * __BOOST_LEVEL__ [endsect] [/ ###############################################################################################] [section:assertion_control_under_debugger `BOOST_TEST_TOOLS_UNDER_DEBUGGER`] When defined, assertions evaluate their expression eagerly, as described [link boost_test.testing_tools.debugging here]. [endsect] [/ assertion_control_under_debugger] [/ ###############################################################################################] [section:assertion_control_under_debuggable `BOOST_TEST_TOOLS_DEBUGGABLE`] When defined, test assertions are compiled in two modes (debugger-friendly and full-featured) and the version is selected at run-time, as described [link boost_test.testing_tools.debugging here]. [endsect] [/ assertion_control_under_debuggable] [endsect] [/ testing_tool_ref]